November | 2019 | A Sweet Berry Designs Blog

Craft Lightning is here again and this months topic is GLITTER! Usually I’m anti-glitter! Like my pastor says, “Jesus is allergic to glitter”! He has a strong dislike for it! Haha! But…..Glitter vinyl and glitter HTV are my jam! I love it! I made this super simple Mom Juice Wine Tumbler using a cut file from the Cricut Design Space!

Heres what you need:

Wine tumbler or any wine glass
Glitter vinyl (I used Cricut)
Cricut (I used the Explore)
Transfer tape
Cricut weeding tool
Cricut Design Space on your computer
Cricut scraper tool or I just use a credit card.
Cricut cutting mat

Heres how to make it:

Open up Design Space on your computer and search for Wine in the search bar of the Images. Make it the appropriate size. TIP: Make sure your wine tumbler is clean.

Using the Cricut, cutting mat and vinyl, cut your design.

Weed the excess vinyl using the Cricut weeding tool.

Apply the transfer tape to the design and rub it with a scraper tool.

Apply to the tumbler, and rub it with your fingers or the scraper tool to make sure it sticks. Remove the transfer tape.

And now your tumbler is ready to fill with your “Mom Juice”!

Be sure to check out the other Craft Lightning Glitter projects by clicking the Craft Lightning Glitter photo below!

Until next time…..

The Fairfield World Pillow Party has been so much fun and these Let it Snow! pillows were super fun and easy to make. My friends over at Fairfield World, Laura Kelly Designs, The Hedgehog Hollow put together this fun Holiday Pillow Party blog hop.

What’s needed:

Fairfield Poly-fil Premier Ultra Plush Pillow
1.5 yards of Kunin Premium felt cut from a bolt: Charcoal
9″x12″ Kunin Premium felt: Candy Pink
9″x12″ Kunin Coordinate felt: Silver Dot on White
pins
Snowflake Pattern
Let it Snow! Pattern
Scissors
Beacon Fabri-Tac Premium Fabric Glue
Cutting Mat, Cutting Ruler and Rotary Cutter
Sewing Machine

Fairfield has great pillows to add to any pillow case. They provided these awesome Poly-Fit Premier Ultra Plush Pillow Inserts. I created my very own pillow cases to go over them. Here is how I made them!

The pillows were 20″x20″ so I cut my felt at 21″x21″. I cut 4 squares and then cut 2 of them in half.

Each pillow should have 3 pieces of Charcoal fabric, (1) 21″x21″ and (2) 10.5″x21″. Pin the two smaller pieces to the bigger piece. This leaves an opening in the middle of the back of the pillow.

Leaving 1″ around the edge, sew all the way around the pillow case.

Once the pillow cases are all sewn, remove all of the pins and put the insert in the pillow case.

Print out the patterns and pin them to the felt.

Cut the snowflakes and the letters from the felt.

Once everything is cut out, lay the pieces out on the pillowcase to make sure you have it where you want it.

Using Beacon’s Fabric-Tac Premium Fabric Glue, glue your pieces in place.

Let the glue dry and then your pillows are ready to use!

Hope you like these adorable Let it Snow! Pillows that I created for the Fairfield World Pillow Party 2019. Be sure to check out the other pillows that were created!