Poly-fil® Poly-Pellets® | A Sweet Berry Designs Blog

Ornaments are my favorite thing to make at the holidays and these Poly-Pellet® Christmas Ornaments were so much fun! I usually don’t get to make ornaments for my own tree, as I am always making them to sell and they are usually made from all wood. But I love how these Poly-Pellet® ornaments turned out and they will definitely be hanging on my tree.

Materials:

Wood ornament cutouts (I cut mine out on my Glowforge, but you can buy them at a local craft store)
Plain and Dyed Poly-Pellets (You can see the YouTube video below to see how I dyed mine.)
Ribbon and string
Hot glue gun and hot glue sticks
Paint Pens

How I dyed my Poly-Pellets:

How I made my ornaments:

For my snowman ornament, I used plain Poly-Pellets®. I glued the Poly-Pellets® to my wooden snow man. I left the arms so that I could paint them brown. TIP: I glued in sections so that the glue didn’t dry too quickly.

Once the first layer was dry, I glued on another layers.

Once the glue was dry, I used a paint pen to paint the arms of my snowman.

I did the same thing with my Christmas tree ornament. I used the brown paint pen to color the stem of the tree.

I wanted my ornaments to be thicker, so layering gave it the thickness I was looking for.

I used small bits of the dyed Poly-Pellets to add details to my ornaments. The snowman got buttons, eyes and a nose. I added a ribbon for the scarf. The tree got lights or small ornaments.

I love how these turned out. You can get Poly-Pellets online at www.fairfieldworld.com.

Until next time, Happy Crafting!

Lately I’ve been playing around with resin and Fairfield World’s Poly-Pellets® to see what all I could possibly make with the combination. One idea I came up with was to create a bird bath bowl! It could also be used as a bird feeder bowl.

Materials used:

Fairfield World Poly-Pellets®
Two Part Resin (I use Envirotex Lite®)
3 Mixing Cups (2 small and 1 bigger)
Mixing Sticks
Plastic Wrap
Hot Glue Gun and Glue Sticks
Mixing Bowl
Heat Gun
Sharpie marker
Scissors

How I made it:

First, I mixed my two part resin. I measured out equal amounts of the resin and the hardener in two separate cups. I then poured both into a larger cup. Following the instructions, I let it sit for a few minutes before mixing it so that the bubbles could rise to the top.

While I let the mix sit, I wrapped plastic wrap around my cutting mat. I used the mat to protect the table. You don’t have to use it. I used a marker to draw out my bowl pattern.

With the hot glue gun and glue sticks, I went over the marker line with the hot glue, building it up so that I have a wall to keep the resin and poly-pellets® in.

Once I was done building the wall of glue, I mixed up the resin and hardener until it was completely mixed, about 2 minutes.

To measure how many poly-pellets I would need, I poured them out onto my plastic wrap, within the walls of the glue. I then poured them into the mixed resin and then mixed them in, coating the poly-pellets® with the resin.

Using a mixing stick, I spread out the mix until it was all the way to the edges and even.

With my heat gun on high, I waved it above the resin to help pop any bubbles that had developed. Then I left it alone to harden.

After it has started to harden for a few hours, I covered a mixing bowl with plastic wrap and turned it upside down. I then picked up the almost hardened resin with poly-pellets® and turned it over onto the bottom of the bowl. I molded it around the mixing bowl creating an upside down bowl.